Car Charging Station Preparation | Cross-Industry Collaboration: Magic Array Supercharging System

Several years ago, a friend who works as a commercial charging station operator said: When building a charging station, it is always difficult to choose how many charging stations to install and what type of ev charging stations to install.

Difficulty in Choosing a Format:

Choosing an integrated charging station: The power utilization rate of the electric car charging station is relatively low, resulting in poor cost-effectiveness.

Choosing a split charging station: There are concerns that some malfunctions of a split charging station may affect the use of all terminals, and the initial investment is also relatively high.

Quantity Difficulty:

Installing Only Two Units: If you want to add more devices later, it’s difficult to deal with the existing ones. Keeping them all looks out of place, but discarding them is a waste.

Installing a Full Group Charging System: The investment is too large, and if the traffic doesn’t meet expectations, the payback period is hard to guarantee.

So, let’s not choose one, let’s take them all:

The ModuGrid system uses an all-in-one unit as a group charging system, allowing for power splicing and flexible capacity expansion.

Electric Car Charging Stations

This is the product I’m highlighting this year—the BH06-M6 Magic Array.

Taking an 80kW all-in-one PC as an example, every BEIHAI Power Magic Array series all-in-one PC is equipped with interfaces designed for expansion and splicing.

That would be a scenario like this:

Taking the 80KW integrated charging pile as an example, every BEIHAI Power Magic Array series integrated unit is prepared for expansion and splicing in terms of interface.

You first invested in an 80kW integrated unit as a trial run.

What?
You’re too good at operations; you have too many vehicles to charge?

Then let’s add another 80kW single-gun integrated unit, smoothly paralleling it to a 160kW four-gun split unit.

What?

Still not enough?

Then we’ll add another 80kW single-gun integrated charger.

Smoothly paralleled, it becomes a 240kW 6-gun split charger.

What?

Worried about malfunctions?

Ours are integrated chargers; each one can be used independently!

Worried about wasted power?

Ours are group chargers; power can be flexibly allocated!

Essential parameters for the BH06 charging station:

Essential parameters for the BH06 ev charging station:

If you want to build a website but have many concerns,

don’t worry, entrust your problems to China BeiHai Power. We are your exclusive design team to ensure a smooth website launch.


Post time: Nov-18-2025